Conceptronic C54NETCAM Guide d'installation télécharger pdf (Page 27)

ENGLISH

• Click on the ‘Next’ button to go to the ‘E-mail Setting’ page.

The following options can be set or changed:

- SMTP Server Address : If you want to use the e-mail notification option, you can

enter the server for outgoing e-mail here. For example:

“smtp.myemail.com”, where ‘myemail’ is the name of your

ISP. The correct settings can be obtained from your ISP.

This server address must be corresponding with the ‘Sender E-

mail Address’ entered below.

- Sender E-mail Address : Enter the e-mail address of the user who will send the e-mail.

For example: “[email protected]”.

- Authentication Mode : If the e-mail server needs authentication (login info) for

outgoing e-mail, select ‘SMTP’. Otherwise leave it ‘None’.

- Sender User Name : Enter the user name corresponding with the e-mail address

entered under ‘Sender E-mail Address’.

- Sender Password : Enter the password for the e-mail address that is entered

under ‘Sender E-mail Address’.

- Receiver #1 E-mail Address : Enter the e-mail address of the first person who

will receive the e-mail.

- Receiver #2 E-mail Address : Optionally enter the e-mail address of the second

who will receive the e-mail.

Note:

If you do not want to use the e-mail option, you can leave all fields blank.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 156 157

Pas de commentaire

Conceptronic C54NETCAM Guide d'installation Page 27